工廠車間從事生產作業時會產生刺激性等有害氣體之污染物，對大自然生態與廠區環境都會造成空氣污染之危害，該設備將所排放的廢氣加以收集后，利用活性炭吸附塔將廢氣處理至符合空氣污染物排放標準后再排放至大氣中，以免造成環境與人員之危害。

When the factory workshop is engaged in production, it will produce irritating and other harmful gas pollutants, which will cause air pollution hazards to the natural ecology and the plant environment. After collecting the exhaust gas, the equipment will use the activated carbon adsorption tower to treat the exhaust gas to meet the air pollutant emission standards, and then discharge it to the atmosphere, so as to avoid the harm to the environment and personnel.

活性炭吸附脫硫+催化燃燒是新一代VOCs處理設備，是將吸附濃縮單元和熱氧化單元有機地結合起來的一種方法，主要適用于較低濃度有機氣體且不宜采用直接燃燒或催化燃燒法和吸附回收法處理的有機廢氣，尤其對大風量的處理場合，均可獲得滿意的經濟效果和社會效果。經吸附凈化并脫附后轉換成小風量、高濃度的有機廢氣，對其進行熱氧化處理，并將有機物燃燒釋放的熱量有效利用。

Activated carbon adsorption desulfurization + catalytic combustion is a new generation of VOCs treatment equipment. It is a method that organically combines adsorption concentration unit and thermal oxidation unit. It is mainly suitable for organic waste gas with low concentration, which is not suitable for direct combustion, catalytic combustion and adsorption recovery. Especially for the treatment of large air volume, it can obtain satisfactory economic and social effects It will work. After adsorption purification and desorption, it is converted into organic waste gas with small air volume and high concentration, which is treated by thermal oxidation, and the heat released by organic matter combustion is effectively utilized.

活性炭吸附脫硫+催化燃燒的技術特點

Technical characteristics of activated carbon adsorption desulfurization and catalytic combustion

1、吸附凈化效率高，處理效果穩定，確保廢氣達標排放。

1. The adsorption purification efficiency is high, and the treatment effect is stable, so as to ensure the emission of waste gas up to the standard.

2、具有手動和自動脫附功能，選用貴金屬催化劑，通過催化燃燒反應將有機物轉化，催化效率高，性能穩定。

2. It has the function of manual and automatic desorption, selects precious metal catalyst, and converts organic matter through catalytic combustion reaction, with high catalytic efficiency and stable performance.

3、采用PLC控制，配套可操作觸摸屏，使用操作方便，維護管理簡單。

3. PLC control and touch screen are adopted. It is easy to operate and maintain.

4、具備多重安全措施，主反應器配有泄爆裝置，設置多點溫度探測，具有故障警報及應急處置能力等。

4. With multiple safety measures, the main reactor is equipped with explosion relief device, multi-point temperature detection, fault alarm and emergency response capacity.

以上就是活性炭吸附脫硫+催化燃燒技術的特點介紹，希望可以幫助到大家，更多精彩內容請大家關注：https://www.sdjialaite.com會有更加精彩內容呈現給大家。

The above is the introduction of the characteristics of activated carbon adsorption desulfurization + catalytic combustion technology. I hope it can help you. Please pay attention to more wonderful contents https://www.sdjialaite.com There will be more wonderful content for you.